High speed motor spindle
  <inverter control, for precision work, high-stiffness>

"Leutor HS spindle" is best tool for finish prosess of mold.
"Leutor EL spindle"are used to much FA line.
Work sample

 ◆ diamond endmill to an acrylic board (HS-2700)

 ◆ drilling dia0.15, depth1.2mm, work SKD-11 (HS-2550)


Model Image Speed OutPut
(W)
Torque
(N.m)
Size (mm) Chuck (mm) cooling shank link
Max Min Dia Max Type Max
ELM-64
S12.7
20,000 5,000 520 0.44 70 70 F 12.7 air NO detail
ELM-64
S31.75
20,000 5,000 520 0.44 70 70 F 31.75 air NO
ELM-64 24,000 5,000 520 0.44 70 70 C 6.35 air NO detail
ELM-64Y 24,000 5,000 520 0.44 70 70 S 7 air NO
ELM-64YC 35,000
HSM-2800CL 18,000 6,000 1400 1.1 95 95 S 12 - NO detail
HSM-2850 10,000 2,000 1,000 2.2 95 95 S 12 - NO detail
HQM-50 24,000 5,000 720 0.44 50 110 S 12 self NO detail
HS-3500 17,000 2,500 1600 1.8 126 159 S 16 self NO detail
HSM-3300 23,000 2,500 900 1.1 132 S 12 self OK detail
HSM-3400 15,000 2,500 900 1.1 132 S 20 self OK detail
chuck type S:SpringCollet D: Drill Chuck C:Collet Chuck




Example of using the HS spindle

It is not only the machining center and milling and attached to the main spindle and lathe of the machine and used to the grinding and drilling etc.



   HOME    Leutor TOP


Nihon Seimitsu Kikai Kosaku Co,.Ltd.
mail: trade@L-nihon.co.jp